Új hozzászólás Aktív témák

• #977 mmdms addikt greatchaos #976

  Új Válasz 2008-02-09 15:16:41 #977

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  mmdms

  addikt

  válasz greatchaos #976 üzenetére

  flesselőnek neve esetleg? mit értesz az alatt hogy szükséges hüyeség?
  na ez picit hosszu lessz:
  Managing and Updating Your BIOS
  -----------------------------------------------------------------------------------
  1.1 Upon First Use of the Computer System
  It is recommended that you save a copy of the original motherboard BIOS along with a
  Flash Memory Writer utility (AFLASH.EXE) to a bootable floppy disk in case you need
  to reinstall the BIOS later. AFLASH.EXE is a Flash Memory Writer utility that updates
  the BIOS by uploading a new BIOS file to the programmable flash ROM on the motherboard.
  This file works only in DOS mode. To determine the BIOS version of your motherboard,
  check the last four numbers of the code displayed on the upper left-hand corner of your
  screen during bootup. Larger numbers represent a newer BIOS file.

  1. Type FORMAT A:/S at the DOS prompt to create a bootable system floppy disk.
  DO NOT copy AUTOEXEC.BAT & CONFIG.SYS to the disk.

  2. Type COPY D:\AFLASH\AFLASH.EXE A:\ (assuming D is your CD-ROM drive) to copy
  AFLASH.EXE to the just created boot disk.
  NOTE: AFLASH works only in DOS mode. It will not work with DOS prompt in Windows and will
  not work with certain memory drivers that may be loaded when you boot from your hard
  drive. It is recommended that you reboot using a floppy.

  3. Reboot your computer from the floppy disk.
  NOTE: BIOS setup must specify floppyÓ as the first item in the boot sequence.

  4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH.

  5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>.
  The Save Current BIOS To File screen appears.

  6. Type a filename and the path, for example, A:\XXX-XX.XXX and then press <Enter>.

  ----------------------------------------------------------------------------------------

  1.2 Updating BIOS Procedures

  1. Download an updated ASUS BIOS file from the Internet (WWW or FTP)
  (see ASUS CONTACT INFORMATION on User Ma for details) and save to the disk you created earlier.

  2. Boot from the disk you created earlier.

  3. At the A:\ prompt, type AFLASH and then press <Enter>.

  4. At the Main Menu, type 2 and then press <Enter>.
  The Update BIOS Including Boot Block and ESCD screen appears.

  5. Type the filename of your new BIOS and the path, for example, A:\XXX-XX.XXX, and then press <Enter>.
  NOTE: To cancel this operation, press <Enter>.

  6. When prompted to confirm the BIOS update, press Y to start the update.

  7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be
  updated automatically only when necessary. This will minimize the chance that a failed update will
  prevent your system from booting up. When the programming is finished, Flashed Successfully will
  be displayed.
  NOTE: When you see the message "Boot Block is different" you may still press <Y> to update the BIOS.
  Yet if the update fails, your system will run a greater risk of boot failure depending on
  whether the boot block is damaged or not.

  8. Follow the onscreen instructions to continue.

  ebből kéne kiindulnom?

  [ Szerkesztve ]

  ElGuRuLt a GyoGySzErEm...VaGy CsAk FoRDíTvA VeTtEm Be?

Új hozzászólás Aktív témák