Új hozzászólás Aktív témák

  • Ano

    őstag

    Boldog Karácsonyt mindenkinek!

    Jött egy válasz a support-tól ... egy olyan nesze semmi fogd meg jól fajta!! :Y

    "According to your description, the 5G-1 only can select the higher than channel 100.
    Because RT2600ac only has Dual-band (2.4Ghz and 5Ghz-1) and after it joined mesh, the 5Ghz-1 channel will switch to the high band channel(Channel 100~169).
    If you would like to connect to the low band channels(Channel 36-64), you may take the clients closes to the Wi-Fi point.
    Or you can consider joining the mesh system with two MR2200ac, MR2200ac is Tri-band router. And you can connect the low band channels both on the main router and Wi-Fi point.
    If there is any problem, please feel free to contact us."

    Szóval szerintük az a megoldás, hogy veszek +1 MR2200ac-t (cirka ~50e ft) és az RT2600ac
    mellé teszem, hogy ott is használhassam a 100-nál alacsonyabb csatornákat ...
    Kész vicc az egész!

    Synology RT6600AX felfedezés alatt

Új hozzászólás Aktív témák