Új hozzászólás Aktív témák

• #1955 itg tag BullZeye #1952

  Új Válasz 2014-09-20 21:12:34 #1955

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  itg

  tag

  válasz BullZeye #1952 üzenetére

  Vinyó rendben van?

  MyCloud:~# smartctl -a /dev/sda1
  smartctl 5.41 2011-06-09 r3365 [armv7l-linux-3.2.26] (local build)
  Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  
  === START OF INFORMATION SECTION ===
  Device Model: WDC WD20EFRX-68EUZN0
  Serial Number: WD-WCC4M1585305
  LU WWN Device Id: 5 0014ee 2b45eb266
  Firmware Version: 80.00A80
  User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  Sector Sizes: 512 bytes logical, 4096 bytes physical
  Device is: Not in smartctl database [for details use: -P showall]
  ATA Version is: 9
  ATA Standard is: Exact ATA specification draft version not indicated
  Local Time is: Sat Sep 20 21:10:04 2014 CEST
  SMART support is: Available - device has SMART capability.
  SMART support is: Enabled
  
  === START OF READ SMART DATA SECTION ===
  SMART overall-health self-assessment test result: PASSED
  
  General SMART Values:
  Offline data collection status: (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
  Self-test execution status: ( 0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
  Total time to complete Offline
  data collection: (28380) seconds.
  Offline data collection
  capabilities: (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
  SMART capabilities: (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
  Error logging capability: (0x01) Error logging supported.
  General Purpose Logging supported.
  Short self-test routine
  recommended polling time: ( 2) minutes.
  Extended self-test routine
  recommended polling time: ( 255) minutes.
  Conveyance self-test routine
  recommended polling time: ( 5) minutes.
  SCT capabilities: (0x703d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.
  
  SMART Attributes Data Structure revision number: 16
  Vendor Specific SMART Attributes with Thresholds:
  ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
  4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5
  5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4965
  10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
  192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2
  193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 22
  194 Temperature_Celsius 0x0022 095 083 000 Old_age Always - 52
  196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  
  SMART Error Log Version: 1
  No Errors Logged
  
  SMART Self-test log structure revision number 1
  Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  # 1 Short offline Completed without error 00% 0 -
  
  SMART Selective self-test log data structure revision number 1
  SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1 0 0 Not_testing
  2 0 0 Not_testing
  3 0 0 Not_testing
  4 0 0 Not_testing
  5 0 0 Not_testing
  Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
  If Selective self-test is pending on power-up, resume after 0 minute delay.

Új hozzászólás Aktív témák