Új hozzászólás Aktív témák

• #88021 Rowon veterán

  Új Válasz 2023-02-04 20:05:23 #88021

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Rowon

  veterán

  Beírtam terminálba az lspci -v-t, majd szerintem ez lesz az:

  05:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) (prog-if 30 [XHCI])
    Subsystem: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller
    Flags: bus master, fast devsel, latency 0, IRQ 59, IOMMU group 15
    Memory at fc700000 (64-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd

  Kernel modules: xhci_pci


Dmesg az alábbi üzenetet hozza:

[    4.323686] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    4.323813] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.324003] sd 6:0:0:0: [sdc] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB)
[    4.324464] sd 6:0:0:0: [sdc] Write Protect is off
[    4.324467] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 00
[    4.324925] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.327613]  sdc: sdc1
[    4.329002] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    4.390810] raid6: avx2x2   xor() 44306 MB/s
[    4.459012] raid6: avx2x1   gen() 33872 MB/s
[    4.526813] raid6: avx2x1   xor() 40278 MB/s
[    4.594814] raid6: sse2x4   gen() 25026 MB/s
[    4.662814] raid6: sse2x4   xor()  3832 MB/s
[    4.730814] raid6: sse2x2   gen() 21959 MB/s
[    4.798814] raid6: sse2x2   xor() 22756 MB/s
[    4.866873] raid6: sse2x1   gen()  1427 MB/s
[    4.934813] raid6: sse2x1   xor() 20620 MB/s
[    4.934814] raid6: using algorithm avx2x4 gen() 44195 MB/s
[    4.934814] raid6: .... xor() 7492 MB/s, rmw enabled
[    4.934815] raid6: using avx2x2 recovery algorithm
[    4.936808] xor: automatically using best checksumming function   avx       
[    4.951110] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    4.976070] xhci_hcd 0000:05:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xcbc11000 flags=0x0000]
[    4.976082] xhci_hcd 0000:05:00.0: WARNING: Host System Error
[    5.008090] xhci_hcd 0000:05:00.0: Host halt failed, -110
[   41.183115] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command.
[   41.183121] xhci_hcd 0000:05:00.0: USBSTS: 0x0000000c HSE EINT
[   41.215130] xhci_hcd 0000:05:00.0: Host halt failed, -110
[   41.215132] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   41.215139] xhci_hcd 0000:05:00.0: HC died; cleaning up
[   41.215155] usb 3-1: USB disconnect, device number 2
[   41.215287] usb 4-3: USB disconnect, device number 2
[   41.215516] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=36s
[   41.215520] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 09 00 00 00 08 00
[   41.215522] blk_update_request: I/O error, dev sdc, sector 2304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   41.215576] blk_update_request: I/O error, dev sdc, sector 2304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   41.215583] Buffer I/O error on dev sdc1, logical block 32, async page read
[   41.253614] EXT4-fs (nvme1n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   41.342651] systemd[1]: Inserted module 'autofs4'
[   41.353257] systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)


  [ Szerkesztve ]

  Az emberiség két legnagyobb találmánya az írás és a mikrohullámú sütő.

Új hozzászólás Aktív témák