Új hozzászólás Aktív témák

• #4166 maximuss tag

  Új Válasz 2018-03-17 17:23:10 #4166

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  maximuss

  tag

  Merlin firmware 384.4

  384.4 (16-Mar-2018)
  - NEW: Merged with GPL 384_20379 (with some binary components
  from 382_50010 and 384_20308 depending on models)
  - NEW: Added support for the RT-AC5300.
  - NEW: Added support for the RT-AC87U.
  - NEW: Added IPSEC support to the RT-AC86U.
  - NEW: Support the new Entware 64-bit repo on the RT-AC86U.
  To switch to the new repository, re-run the
  entware-setup.sh script. You will need to reinstall
  your apps (your old config files are backed up on
  your USB disk).
  - CHANGED: Tightened security around some config files.
  - CHANGED: Allow guest networks settings for AP isolation
  and SSID broadcast to be set separately from
  their parent interface (John Bacho)
  - CHANGED: Samba protocol support can now be set to
  SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default).
  This will result in a performance drop on all
  models but the RT-AC86U, but will be more secure.
  Ideally, people should change it to SMBv2 only,
  and then reboot all their client devices to start
  using only the new protocol.
  - CHANGED: Re-added some of the logging sd-idle used to do
  in 380.xx.
  - CHANGED: Switched to the new Entware repo for armv7 models.
  To upgrade, run the following commands TWICE:

  opkg update; opkg upgrade

  - FIXED: Resetting an OpenVPN client to default settings
  might revert back after a reboot.
  - FIXED: log flood from lldpd about "unable to send packet
  on real device" (moved to debug level)
  - FIXED: Potential racing condition that could lead to two
  instances of miniupnpd running at boot time.
  - FIXED: Single-char hostnames were rejected by DHCP static
  leasees page. (theMIROn)
  - FIXED: AiCloud could sometime generate a new SSL certificate
  that would overwrite the one stored in jffs. Now,
  AiCloud can also use the same one uploaded by the
  user for the main webui, or the Let's Encrypt one.
  - REMOVED: Telnet server. Please use SSH for console-based
  management.
  - REMOVED: SNMP support on the RT-AC86U (incompatible)
  - REMOVED: Merlin NAT loopback mode (was increasingly
  problematic as the firmware firewall handling became
  more complex)

  [ Szerkesztve ]

Új hozzászólás Aktív témák