Keresés

Új hozzászólás Aktív témák

  • dacsa

    senior tag

    Sziasztok!

    Ezt a fw-t használom suste/headless@OpenWrt@0.8.1 Barrier Breaker 14.07 és a kernel logban ez található:

    [270640.730000] ath: phy0: Failed to stop TX DMA, queues=0x002!
    [274195.470000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [274195.480000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Kell foglalkozzak vele vagy nem számit? :D Működésben semmit nem vettem észre.

    Köszi!

    Üdv DCS

  • siddis

    őstag

    válasz siddis #61954 üzenetére

    Na ez a build is mehet a levesbe..

    Tue Jan 12 20:00:56 2016 kern.err kernel: [38558.477812] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42100020 DMADBG_7=0x000286c0

    Bár 13 egész órát elment.. :D

  • hesszan

    aktív tag

    Sziasztok!

    van egy V1-es routerem, még anno 3G-s usb-s modemmel használtam, szóval 5-6 éve még piszkáltam benne de manapság alapfunkciókra van csak szükségem. 2013óta "OpenWrt vargalex v1.1.7 r35342" (30as upc nettel)
    Amivel egyetlen bajom van a szokásos DMA:

    ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: phy0: Failed to stop TX DMA, queues=0x100!

    kb másfél két éve tünetmentes miután, pár dolgot itteni tanácsok alapján finomhangoltam és lekapcsoltam G-re a sebességet. Tegnap viszont ismét eldobta a wifit részét a router, majd 1-2 perc múlva ment újra. (és ezért jutott eszembe ide benézni)

    amire szükségem lenne a routertöl:
    - gigabit kábelen gyors másolás (mint most 300+ mbit)
    - wifi legyen jelentősen gyorsabb mint most (most ~20mbit körül megy kábeles gépről wifin a laptop)
    - wifi legalább annyira stabil mint most (havonta 1x belefér h eldobja magát)
    - legyen értelmes tűzfal/biztonság benne
    - ha esetleg véletlenül csomagot váltanék felfelé bírja. [upc 120/240? esetleg 500]
    - sok eszközt tudjon kezelni (mint ahogy a mostani tud) ritkán de kell hogy 4 gép kábelen + 4-6 szgép wifin + 6-8 telefon legyen rajta, átlagban gép:2kábel+1wifi + 3teló

    Láttam ezt: link és tetszik. Kérdéseim:
    - Ebben tényleg javítva van a DMA hiba? vagy csak hasonlóan meg van finomhangolva buherálva mint most nálam h 99%ban elfedi a hibát, cserébe a sebesség csökkenésért.
    - leszedem 081 sysupgrade-et és felrakhatom (nokeepsetting) a mostani Luci-ből v1.1.7 r35342? -- readme-t olvastam, de nincs benne h pontosan milyen openwrt verziókhoz :) illetve van külön sysupgrade mappa legkívül de gondolom nem onnan hanem a router neve alól :)
    - most van benne egy 2gb pendrive (/dev/sda2 /mnt 1.78 GB ) azt húzzam ki a frissítés alatt? [és végleg?]
    - ha nem jönne be valamiért akkor hogyan tudok visszaállni? most nyomtam egy backupot, (de az csak ~10kb gondolom a beállítások) szóval visszafelé is kompatibilis? Innen is lehet betallózni másik akár régebbi openwrt-t?

    Illetve ott van a gyári FW. [de úgy emlékszem ott is voltak wifi gondok] A gyári legjobb FW -ről pár gondolatot megoszthattok.

    köszi!

  • CyDoN

    senior tag

    válasz vargalex #46492 üzenetére

    Nos hazaértem!

    OpenWrt vargalex v1.1.7 r35342 firmwaret használok, és log file-ban ilyenek vannak:

    [418459.520000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [418459.530000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [452469.710000] ath: phy0: Failed to stop TX DMA, queues=0x008!
    [452485.420000] ath: phy0: Failed to stop TX DMA, queues=0x008!

  • Intruder2k5

    MODERÁTOR

    válasz parkasz #46168 üzenetére

    Szia!

    Gondolom akkor Te is WiFi-ről beszélsz... Nézd meg, hogy a hibák időpontjában a logban nem találsz-e DMA failed bejegyzéseket?

  • zambozoli

    aktív tag

    válasz suste #45916 üzenetére

    Itt a vége!

    Nov 18 23:00:01 OpenWrt cron.info crond[1944]: crond: USER root pid 2839 cmd /sbin/wifi down
    Nov 18 23:00:02 OpenWrt kern.info kernel: [ 618.130000] device wlan0 left promiscuous mode
    Nov 18 23:00:02 OpenWrt kern.info kernel: [ 618.130000] br-lan: port 2(wlan0) entered disabled state
    Nov 18 23:06:48 OpenWrt kern.info kernel: [ 1024.020000] device wlan0 entered promiscuous mode
    Nov 18 23:06:48 OpenWrt kern.info kernel: [ 1024.340000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:06:48 OpenWrt kern.info kernel: [ 1024.340000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:06:50 OpenWrt kern.info kernel: [ 1026.340000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:07:06 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: authenticated
    Nov 18 23:07:06 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 1)
    Nov 18 23:07:06 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Nov 18 23:16:48 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: group key handshake completed (RSN)
    Nov 18 23:24:21 OpenWrt authpriv.info dropbear[9068]: Child connection from 192.168.111.111:58420
    Nov 18 23:24:37 OpenWrt authpriv.notice dropbear[9068]: Password auth succeeded for 'root' from 192.168.134.102:58420
    Nov 18 23:26:48 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: group key handshake completed (RSN)
    Nov 18 23:29:02 OpenWrt kern.info kernel: [ 2358.250000] device wlan0 left promiscuous mode
    Nov 18 23:29:02 OpenWrt kern.info kernel: [ 2358.260000] br-lan: port 2(wlan0) entered disabled state
    Nov 18 23:29:03 OpenWrt kern.info kernel: [ 2359.780000] device wlan0 entered promiscuous mode
    Nov 18 23:29:04 OpenWrt kern.info kernel: [ 2360.100000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:29:04 OpenWrt kern.info kernel: [ 2360.100000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:29:06 OpenWrt kern.info kernel: [ 2362.100000] br-lan: port 2(wlan0) entered forwarding state
    Nov 18 23:29:08 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: authenticated
    Nov 18 23:29:08 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 1)
    Nov 18 23:29:08 OpenWrt daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN)
    Nov 18 23:31:15 OpenWrt authpriv.info dropbear[9068]: Exit (root): Exited normally
    Nov 18 23:51:51 OpenWrt kern.err kernel: [ 3727.870000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Nov 18 23:51:51 OpenWrt kern.err kernel: [ 3727.880000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 18 23:54:54 OpenWrt kern.err kernel: [ 3910.950000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Nov 18 23:54:54 OpenWrt kern.err kernel: [ 3910.960000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 19 04:35:23 OpenWrt kern.err kernel: [20739.090000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Nov 19 04:35:23 OpenWrt kern.err kernel: [20739.100000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 19 05:00:01 OpenWrt cron.info crond[1944]: crond: USER root pid 19989 cmd /sbin/wifi up
    Nov 19 05:00:02 OpenWrt kern.info kernel: [22218.060000] device wlan0 left promiscuous mode
    Nov 19 05:00:02 OpenWrt kern.info kernel: [22218.060000] br-lan: port 2(wlan0) entered disabled state
    Nov 19 05:00:03 OpenWrt kern.info kernel: [22219.280000] device wlan0 entered promiscuous mode
    Nov 19 05:00:03 OpenWrt kern.info kernel: [22219.590000] br-lan: port 2(wlan0) entered forwarding state
    Nov 19 05:00:03 OpenWrt kern.info kernel: [22219.590000] br-lan: port 2(wlan0) entered forwarding state
    Nov 19 05:00:05 OpenWrt kern.info kernel: [22221.590000] br-lan: port 2(wlan0) entered forwarding state
    Nov 19 05:07:57 OpenWrt kern.err kernel: [22693.620000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Nov 19 05:07:57 OpenWrt kern.err kernel: [22693.630000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

    23:00:01 és 05:00:01 a wifi leállítás és indítás!
    A DMA hiba mintha nem a wifi miatt lenne, viszont most nem feküdt el a router legalább 23:30-ig.

    Mindegy KUKA lesz, meguntam!

  • zambozoli

    aktív tag

    válasz suste #45885 üzenetére

    TM letiltva.
    Nem a wifi pusztult el hanem az egész router volt elérhetetlen, órákon át. Amikor megjavult tele volt a log DMA hibával.

    Én sem értem ez volt a logban:
    Nov 18 05:00:01 OpenWrt cron.info crond[1864]: crond: USER root pid 2897 cmd /sbin/wifi up
    Nov 18 05:00:02 OpenWrt kern.info kernel: [26128.930000] device wlan0 entered promiscuous mode
    Nov 18 05:00:02 OpenWrt kern.info kernel: [26128.930000] br-lan: port 2(wlan0) entering forwarding state
    Nov 18 05:00:02 OpenWrt kern.info kernel: [26128.940000] br-lan: port 2(wlan0) entering forwarding state
    Nov 18 05:00:05 OpenWrt kern.info kernel: [26131.460000] device wlan0 left promiscuous mode
    Nov 18 05:00:05 OpenWrt kern.info kernel: [26131.470000] br-lan: port 2(wlan0) entering forwarding state
    Nov 18 05:00:05 OpenWrt kern.info kernel: [26131.590000] device wlan0 entered promiscuous mode
    Nov 18 05:00:05 OpenWrt kern.info kernel: [26131.600000] br-lan: port 2(wlan0) entering forwarding state
    Nov 18 05:00:05 OpenWrt kern.info kernel: [26131.600000] br-lan: port 2(wlan0) entering forwarding state
    Nov 18 12:05:03 OpenWrt kern.err kernel: [51629.840000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
    Nov 18 12:05:03 OpenWrt kern.err kernel: [51629.850000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 18 12:05:03 OpenWrt kern.err kernel: [51630.090000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Nov 18 12:05:03 OpenWrt kern.err kernel: [51630.100000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 18 12:05:03 OpenWrt kern.err kernel: [51630.340000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x0......
    Itt a vége:
    Nov 18 12:05:12 OpenWrt kern.err kernel: [51639.320000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00008020
    Nov 18 12:05:12 OpenWrt kern.err kernel: [51639.330000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Nov 18 12:05:13 OpenWrt kern.err kernel: [51639.570000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Nov 18 12:05:13 OpenWrt kern.err kernel: [51639.580000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Egész nap nem volt a wifin senki!!!!

    Na akkor ez mi?????

  • Intruder2k5

    MODERÁTOR

    válasz Gare2 #45877 üzenetére

    Szia!

    Elég valószínű, hogy az előtted, és utánad következő hsz-ekben is ugyanez a téma! Szerintem keress Te is a DMA failed kifejezésre itt a topikban, aztán ott olvasgass! De sok jó ne várj...

  • Intruder2k5

    MODERÁTOR

    válasz kosztya2025 #45037 üzenetére

    Szia!

    Szerencsés vagy, hogy csak a napokban tapasztaltad! :)

    Ha rákeresel itt a dma failed kifejezésre, akkor majd meglátod, hogy igazából nagyon sokan küzdenek ezzel!

  • hesszan

    aktív tag

    válasz zambozoli #44982 üzenetére

    Sziasztok!

    nálam ez van pár napja, és ugyanúgy rossz. de irjatok ha valamit láttok amit én szúrtam ki eltérést
    Most még megnézem N-esen is mint nálad, de kétlem hogy jó lesz hiszen Gvel se megy jól.

    config wifi-device 'radio0'
    option type 'mac80211'
    option macaddr 'XXXXXXXXXXXX'
    list ht_capab 'SHORT-GI-40'
    list ht_capab 'DSSS_CCK-40'
    option channel '1'
    option txpower '25'
    option country 'US'
    option hwmode '11g'
    option distance '20'
    option frag '2346'
    option rts '2347'
    option diversity '1'
    option rxantenna '0x7'
    option txantenna '0x3'

    config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'XXX'
    option encryption 'XXXX'
    option key 'XXXX'
    option wmm '0'

    Kernel napló:
    [258094.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
    [258441.030000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [258441.040000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

  • zambozoli

    aktív tag

    Sziasztok!

    Normál használat közben lekapcsolta a router a wifit.
    Ezt találtam a rendszernaplóban:

    Oct 6 06:23:33 OpenWrt kern.err kernel: [31753.600000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Oct 6 06:23:33 OpenWrt kern.err kernel: [31753.610000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Oct 6 06:23:37 OpenWrt kern.err kernel: [31757.320000] ath: phy0: Failed to stop TX DMA, queues=0x004!
    Oct 6 06:23:48 OpenWrt kern.err kernel: [31768.680000] ath: phy0: Failed to stop TX DMA, queues=0x004!
    Oct 6 06:23:50 OpenWrt kern.err kernel: [31770.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
    Oct 6 06:23:53 OpenWrt kern.err kernel: [31772.870000] ath: phy0: Failed to stop TX DMA, queues=0x004!

    Lécci segítsen valaki megfejteni, hogy mi ez!

    Köszönöm.

  • hesszan

    aktív tag

    válasz vargalex #42782 üzenetére

    wifi config:

    csatorna: 1
    Adóteljesítmény: 17 dBm 501mW
    Haladó:
    Mód: 802.11g -- ez volt korábban : 802.11g+n + 20hz
    Országkód: Hu - hungary
    Táv opt/Széttag kösz / rtscts kösz: üres
    Essid: opwenwrt
    Mód hozzáférési pont
    Hálózat: Lan
    essid elrejt / wmm mód: nincs pipa

    Ez meg a fő oladalon van:
    Generic MAC80211 802.11bgn (radio0)
    Csatorna: 1 (2.412 GHz)
    Bitráta: 54 Mbit/s
    [Jel: -37 dBm / Zaj: -95 dBm]
    100% SSID: OpenWrt
    Mód: Master
    BSSID: D8:5D:4C:EB:91:70
    Titkosítás: mixed WPA/WPA2 PSK (TKIP, CCMP)

    A kernel napló utolsó pár sora már nem változott mióta G-re raktam. (a rendszernaplóban semmi extrát nem látok)

    [29626.900000] BruteForce-SSH IN=eth0.2 OUT= MAC=d8:5d:4c:eb:91:70:00:01:5c:31:19:01:08:00:45:00:00:3c SRC=91.121.25.115 DST=89.134.209.10 LEN=60 TOS=0x00 PREC=0x00 TTL=54 ID=45537 DF PROTO=TCP SPT=55571 DPT=2222 WINDOW=14600 RES=0x00 SYN URGP=0
    [222305.530000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [222305.540000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [260889.030000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [260889.040000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [657979.230000] device wlan0 left promiscuous mode
    [657979.240000] br-lan: port 2(wlan0) entered disabled state
    [657980.190000] cfg80211: Calling CRDA for country: HU
    [657980.190000] cfg80211: Regulatory domain changed to country: HU
    [657980.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [657980.210000] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [657980.210000] cfg80211: (5170000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [657982.500000] device wlan0 entered promiscuous mode
    [657982.940000] br-lan: port 2(wlan0) entered forwarding state
    [657982.940000] br-lan: port 2(wlan0) entered forwarding state
    [657984.940000] br-lan: port 2(wlan0) entered forwarding state
    [701403.960000] br-lan: port 2(wlan0) entered disabled state
    [701404.120000] device wlan0 left promiscuous mode
    [701404.120000] br-lan: port 2(wlan0) entered disabled state
    [701406.690000] device wlan0 entered promiscuous mode
    [701407.330000] br-lan: port 2(wlan0) entered forwarding state
    [701407.340000] br-lan: port 2(wlan0) entered forwarding state
    [701409.340000] br-lan: port 2(wlan0) entered forwarding state

    (#42792) suste

    nézem a logot? kb mennyi idő múlva jelenik meg a hiba? vagy szted mit kell csinálni hozzá? mert van hogy órákig jó, de van hogy reboot után szinte azonnal szivat a wifi.
    illetve hogyan lehet törölni a log eddigi részét?

    (#42796) Intruder2k5
    meg egy ötös lottó főnyeremény

  • direwolf

    őstag

    válasz vargalex #38122 üzenetére

    Szia Alex!

    Szerinted mitől lehet ez a kernel logban?
    [50340.130000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

    És van ilyen is, de ez már régebb óta:
    [84305.270000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    [84305.280000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [84305.750000] ath: phy0: Failed to stop TX DMA, queues=0x100!

  • huliganboy

    addikt

    Üdv mindenkinek!

    Van valakinek tapasztalata openwrt alatt WDS-el? Ha igen akkor azok pozitívak vagy negatívak?

    Más: Engem is megtalált kedves barátunk és folyamatosan bombáz az alex féle ssh porton..... Ennek lehet köze ahhoz hogy a napokban a bejövő és kimenő kapcsolataim instabilak voltak?

    Rendszer log (ez csak egy kis része kb 100-120 bejegyzés):

    Jan 9 14:11:45 OpenWrt kern.warn kernel: [225853.680000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=21595 DF PROTO=TCP SPT=34787 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    Jan 9 14:11:46 OpenWrt kern.warn kernel: [225854.140000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=47627 DF PROTO=TCP SPT=34840 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    Jan 9 14:11:46 OpenWrt kern.warn kernel: [225854.560000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=35120 DF PROTO=TCP SPT=34893 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    Jan 9 14:11:47 OpenWrt kern.warn kernel: [225855.020000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=38801 DF PROTO=TCP SPT=34946 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    Jan 9 14:11:47 OpenWrt kern.warn kernel: [225855.450000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=2883 DF PROTO=TCP SPT=34999 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    Jan 10 20:49:01 OpenWrt kern.err kernel: [336089.980000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    Jan 10 20:49:01 OpenWrt kern.err kernel: [336089.990000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Kernel log: (ez csak egy kis része kb 150-200 bejegyzés)

    [225852.460000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=2882 DF PROTO=TCP SPT=34999 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225852.810000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=14445 DF PROTO=TCP SPT=34681 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225853.330000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=15512 DF PROTO=TCP SPT=34734 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225853.680000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=21595 DF PROTO=TCP SPT=34787 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225854.140000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=47627 DF PROTO=TCP SPT=34840 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225854.560000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=35120 DF PROTO=TCP SPT=34893 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225855.020000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=38801 DF PROTO=TCP SPT=34946 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [225855.450000] BruteForce-SSH IN=pppoe-wan OUT= MAC= SRC=207.223.243.125 DST=188.143.21.201 LEN=60 TOS=0x00 PREC=0x00 TTL=42 ID=2883 DF PROTO=TCP SPT=34999 DPT=2222 WINDOW=5840 RES=0x00 SYN URGP=0
    [336089.980000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [336089.990000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Folyamatosan követtem az eseményeket itt a fórumon, de arra nem találtam választ, hogy ha bejönne az illető azt valahol lehet e látni?

    Köszönöm a válaszokat! :R :R

  • Jamboo529

    senior tag

    Extroot megy pendriveon, ami egy usbhubbal van bekötve a routerre.
    Erre csatlakozik még 1 webcam és 1 nyomtató.
    Amióta csatlakoztattam a nyomtatót, és bekapcsoltam (multifunkciós, ezért a sane csomagokkal is próbálkozom, hátha megy valahogy a scanner funkció. Szóval azok is telepítve vannak. ) a p910nd-t, időnként leállítódik a webcam "mjpg-streamer" scriptje.
    Ez mitő lehet?

    Ez lenne a gond?:
    [ 298.520000] usb 1-1.3: new high-speed USB device number 7 using ehci-platform
    [ 298.630000] usblp0: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [ 298.650000] scsi1 : usb-storage 1-1.3:1.2
    [ 299.650000] scsi 1:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [ 299.670000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
    [ 913.970000] usb 1-1.3: USB disconnect, device number 7
    [ 913.980000] usblp0: removed
    [ 917.030000] usb 1-1.3: new high-speed USB device number 8 using ehci-platform
    [ 917.140000] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [ 917.160000] scsi2 : usb-storage 1-1.3:1.2
    [ 918.160000] scsi 2:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [ 918.180000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [ 4149.070000] usb 1-1.3: USB disconnect, device number 8
    [ 4149.080000] usblp0: removed
    [ 4155.200000] usb 1-1.3: new high-speed USB device number 9 using ehci-platform
    [ 4155.310000] usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [ 4155.330000] scsi3 : usb-storage 1-1.3:1.2
    [ 4156.330000] scsi 3:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [ 4156.350000] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 5564.500000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [ 6515.870000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [ 9311.350000] usb 1-1.3: USB disconnect, device number 9
    [ 9311.360000] usblp0: removed
    [75734.970000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [75734.980000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [85359.200000] usb 1-1.3: new high-speed USB device number 10 using ehci-platform
    [85359.310000] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [85359.330000] scsi4 : usb-storage 1-1.3:1.2
    [85360.330000] scsi 4:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [85360.350000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    [86096.510000] usb 1-1.3: USB disconnect, device number 10
    [86096.520000] usblp0: removed
    [87611.270000] usb 1-1.3: new high-speed USB device number 11 using ehci-platform
    [87611.380000] usblp0: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [87611.400000] scsi5 : usb-storage 1-1.3:1.2
    [87612.400000] scsi 5:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [87612.420000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
    [89576.370000] usb 1-1.3: USB disconnect, device number 11
    [89576.380000] usblp0: removed
    [169127.110000] usb 1-1.3: new high-speed USB device number 12 using ehci-platform
    [169127.220000] usblp0: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1730
    [169127.240000] scsi6 : usb-storage 1-1.3:1.2
    [169128.240000] scsi 6:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
    [169128.260000] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [174795.420000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [174812.370000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [174837.170000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [174840.470000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [174899.750000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [175049.490000] usb 1-1.3: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
    [176600.610000] usb 1-1.3: USB disconnect, device number 12
    [176600.620000] usblp0: removed

  • Kris87

    aktív tag

    Sziasztok!

    A kernel naplóban van pár száz ilyen bejegyzés egymás után:

    [23003.870000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [23003.880000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Ez miez? Köszi!

  • hiperr

    csendes tag

    Hali!

    ez miért van?...

    Aug 27 01:26:28 RouteR kern.err kernel: [ 1727.460000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Aug 27 01:26:28 RouteR kern.err kernel: [ 1727.470000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Aug 27 01:26:28 RouteR kern.err kernel: [ 1727.490000] ath: phy0: Failed to stop TX DMA, queues=0x100!
    Aug 27 01:26:29 RouteR kern.err kernel: [ 1727.970000] ath: phy0: Failed to stop TX DMA, queues=0x100!
    Aug 27 01:26:29 RouteR kern.err kernel: [ 1728.440000] ath: phy0: Failed to stop TX DMA, queues=0x100!
    Aug 27 01:26:29 RouteR kern.err kernel: [ 1728.920000] ath: phy0: Failed to stop TX DMA, queues=0x100!

    és a wifi folyamatosan ledobál mindent(laptop iPad iPhone)

    thx...

  • ozz

    tag

    System log

    System log-ban ez van

    Jun 29 09:41:50 OpenWrt kern.err kernel: [34862.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:50 OpenWrt kern.err kernel: [34863.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34863.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34863.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:51 OpenWrt kern.err kernel: [34864.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34864.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34864.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:52 OpenWrt kern.err kernel: [34865.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34865.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34865.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:53 OpenWrt kern.err kernel: [34866.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34866.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34866.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:54 OpenWrt kern.err kernel: [34867.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34867.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34867.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:55 OpenWrt kern.err kernel: [34868.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34868.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34868.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:56 OpenWrt kern.err kernel: [34869.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34869.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34869.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:57 OpenWrt kern.err kernel: [34870.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34870.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34870.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:58 OpenWrt kern.err kernel: [34871.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34871.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34871.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:41:59 OpenWrt kern.err kernel: [34872.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34872.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34872.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34873.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jun 29 09:42:00 OpenWrt kern.err kernel: [34873.150000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** IEEE 802.11: authenticated
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 09:42:03 OpenWrt daemon.info hostapd: wlan0: STA 30:17:**:**:**:** WPA: pairwise key handshake completed (RSN)
    Jun 29 09:42:07 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPDISCOVER(br-lan) 30:17:**:**:**:**
    Jun 29 09:42:07 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPOFFER(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** IEEE 802.11: authenticated
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** IEEE 802.11: associated (aid 2)
    Jun 29 09:42:11 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: pairwise key handshake completed (RSN)
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPREQUEST(br-lan) 192.168.1.248 1c:4b:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPACK(br-lan) 192.168.1.248 1c:4b:**:**:**:** Zoli-PC
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPREQUEST(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:42:11 OpenWrt daemon.info dnsmasq-dhcp[1926]: DHCPACK(br-lan) 192.168.1.134 30:17:**:**:**:**
    Jun 29 09:51:33 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:01:33 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:11:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:21:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:31:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:41:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 10:51:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:01:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:11:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:18:53 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:53 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:18:58 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:01 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:01 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:06 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:06 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:11 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:11 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:16 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:19:21 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: authenticated
    Jun 29 11:19:21 OpenWrt daemon.info hostapd: wlan0: STA f8:d1:**:**:**:** IEEE 802.11: associated (aid 1)
    Jun 29 11:21:34 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)
    Jun 29 11:31:35 OpenWrt daemon.info hostapd: wlan0: STA 1c:4b:**:**:**:** WPA: group key handshake completed (RSN)

  • ozz

    tag

    válasz ozz #28300 üzenetére

    Kernel log-ban meg ez

    gine when we start RX up
    [34851.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34851.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34851.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34851.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34852.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34852.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34852.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34853.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34853.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34854.810000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34854.820000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.060000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.070000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.310000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34855.320000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.560000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.570000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34855.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34855.840000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.080000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34856.090000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.330000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.340000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.580000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.590000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34856.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34856.840000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.080000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.090000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.330000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.340000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.580000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.590000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34857.830000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34857.830000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34861.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34861.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34862.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34862.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34863.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34863.920000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.160000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.170000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.410000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.420000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.660000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34864.670000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34864.910000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34864.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34865.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34865.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34866.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34866.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34866.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34866.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34866.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34867.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34867.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34868.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34868.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34868.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34869.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34869.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34870.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34870.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34870.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34870.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34870.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34871.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34871.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34871.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    [34872.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.400000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.410000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34872.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34872.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [34873.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [34873.150000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [35569.910000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915627153:1915627303 (repaired)
    [35643.070000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915827406:1915828850 (repaired)
    [35683.670000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35684.550000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35686.310000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)
    [35689.840000] TCP: Peer 82.131.159.43:14888/57582 unexpectedly shrunk window 1915960802:1915961807 (repaired)

  • huliganboy

    addikt

    Sziasztok!

    A következő problémára keresek választ( vargalex v1.1 (trunk, r30817):

    A routerre néha lehetetlen felcsatlakozni wifin keresztül mivel hol van jel hol nincs. A kliensek látják 10-20 másodpercig majd mikor csatlakoznának eltűnik a jel teljesen.

    A másik ami szerintem ezzel összefüggésben van az hogy ha csatlakozva vagyok néha teljesen megáll a net. A csatlakozás megmarad viszont a kliensek szerint a következőt érzékelik:

    Másik hálózat egy van ami itt bekavarhatna de az sem ezen a csatornán:

    A kernelnapló ilyenekkel van tele:

    [82006.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [82006.910000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [82007.150000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [82007.160000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [82007.420000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [82007.430000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [82007.670000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020

    A rendszernapló pedig ilyenekkel:

    May 17 18:06:27 OpenWrt kern.err kernel: [251492.380000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
    May 17 18:06:27 OpenWrt kern.err kernel: [251492.390000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    May 17 18:06:27 OpenWrt kern.err kernel: [251492.650000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    May 17 18:06:27 OpenWrt kern.err kernel: [251492.660000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    May 17 18:06:28 OpenWrt kern.err kernel: [251492.900000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020

    A harmadik kérdésem pedig az lenne hogy N kliensek miért csak 65Mbps sebességel mennek?

    Köszönöm a segítséget :R :R

  • Marcelldzso

    tag

    Mostanában ezzel vagyok tele. Ez mit takar?
    [342226.340000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342226.350000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [342226.590000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342226.600000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [342226.840000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342226.850000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [342227.090000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342227.100000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [342227.340000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342227.350000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [342227.590000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [342227.600000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

  • arty

    veterán

    vargalex v1.02 (trunk, r29492) van fent, néha a wifi totálisan belassul. notebookon egy pillanatra sárga felkiáltójeles lesz, majd "felére" esik a jel, de az oldalak vagy nem jönnek be vagy pokoli lassan.

    system log:
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: authenticated
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: associated (aid 1)
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: associated (aid 1)
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: associated (aid 1)
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
    May 11 09:17:22 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 WPA: pairwise key handshake completed (RSN)
    May 11 09:17:27 malacka daemon.info dnsmasq-dhcp[1995]: DHCPREQUEST(br-lan) 192.168.1.101 00:1f:3c:57:d5:18
    May 11 09:17:27 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.101 00:1f:3c:57:d5:18 d830-wifi
    May 11 09:22:30 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: authenticated
    May 11 09:22:30 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 IEEE 802.11: associated (aid 1)
    May 11 09:22:30 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 WPA: pairwise key handshake completed (RSN)
    May 11 09:22:30 malacka daemon.info dnsmasq-dhcp[1995]: DHCPREQUEST(br-lan) 192.168.1.101 00:1f:3c:57:d5:18
    May 11 09:22:30 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.101 00:1f:3c:57:d5:18 d830-wifi
    May 11 09:22:50 malacka daemon.info dnsmasq-dhcp[1995]: DHCPINFORM(br-lan) 192.168.1.101 00:1f:3c:57:d5:18
    May 11 09:22:50 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.101 00:1f:3c:57:d5:18 d830-wifi
    May 11 09:24:12 malacka daemon.info dnsmasq-dhcp[1995]: DHCPINFORM(br-lan) 192.168.1.101 00:1f:3c:57:d5:18
    May 11 09:24:12 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.101 00:1f:3c:57:d5:18 d830-wifi
    May 11 09:25:49 malacka daemon.info dnsmasq-dhcp[1995]: DHCPINFORM(br-lan) 192.168.1.101 00:1f:3c:57:d5:18
    May 11 09:25:49 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.101 00:1f:3c:57:d5:18 d830-wifi
    May 11 09:26:13 malacka daemon.info dnsmasq-dhcp[1995]: DHCPDISCOVER(br-lan) 50:e5:49:38:fc:16
    May 11 09:26:13 malacka daemon.info dnsmasq-dhcp[1995]: DHCPOFFER(br-lan) 192.168.1.242 50:e5:49:38:fc:16
    May 11 09:26:17 malacka daemon.info dnsmasq-dhcp[1995]: DHCPREQUEST(br-lan) 192.168.1.242 50:e5:49:38:fc:16
    May 11 09:26:17 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.242 50:e5:49:38:fc:16 c64
    May 11 09:26:20 malacka daemon.info dnsmasq-dhcp[1995]: DHCPINFORM(br-lan) 192.168.1.242 50:e5:49:38:fc:16
    May 11 09:26:20 malacka daemon.info dnsmasq-dhcp[1995]: DHCPACK(br-lan) 192.168.1.242 50:e5:49:38:fc:16 c64
    May 11 09:27:18 malacka daemon.info hostapd: wlan0: STA 00:1f:3c:57:d5:18 WPA: group key handshake completed (RSN)
    May 11 09:32:48 malacka authpriv.info dropbear[7867]: Child connection from 192.168.1.242:49587

    kernel log:
    [272636.420000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272636.430000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272636.670000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272636.680000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272636.920000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272636.930000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272637.190000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272637.200000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272637.430000] ath: Failed to stop TX DMA, queues=0x004!
    [272637.450000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272637.460000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272637.700000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272637.710000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272637.950000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272637.960000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272638.200000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272638.210000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272638.450000] ath: Failed to stop TX DMA, queues=0x004!
    [272638.470000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272638.470000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272638.720000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272638.730000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272638.970000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272638.980000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [272639.220000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [272639.230000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [646470.060000] ath: Failed to stop TX DMA, queues=0x004!

    miután lehalt, ideültem a géphez és vezetékes neten beléptem, bemásoltam a logokat - nemtudom ad e bárkinek bármi ötletet...

    mások wifije aligha kavarhat be:

    transmit power levéve 5mW-ra, wpa2-psk a "védelem". másik laptoppal is megtörtént, bár az tény, hogy ez a mostani is a hálón volt abban a pillanatban... egy kliens is bekavarhat?

  • vitezlejszlo

    őstag

    Sziasztok

    1.1-es Vargalex fele optware-em van, 19 nap utan megallt a Wifi mukodese, a logban ez volt:

    [1586768.530000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    [1586768.540000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Router mukodik, wifi nem. Ismert hiba ez? Reboot megvolt, de meg nem tert magahoz a dyndns :D

    Koszi

    Laca

  • Szita1

    tag

    válasz vargalex #25005 üzenetére

    Sziasztok, Erre tud valaki gyógyírt??

    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [158394.190000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Tele van a kernel log vele :(

  • boatkiller

    tag

    válasz vargalex #24725 üzenetére

    Szia!

    Nálam is jelentkezik a hiba:

    Mar 23 11:36:43 OpenWrt kern.err kernel: ath: Failed to stop TX DMA!
    Mar 23 11:36:29 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Mar 23 11:36:29 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040

    Mostanság csak egy HP mini5101 lóg a wifin. A netbook Broadcom 5343 chipset-tel van szerelve.
    Ha megszakítom a kapcsolatot, majd újra csatlakozok akkor egy darabig minden rendben, majd később újra jelentkezik a hiba.

    OpenWrt | vargalex v1.01 (trunk, r27699) |
    Load: 0.13 0.05 0.05

    Ez a jelenség már a korábbi fw-nél is jelentkezett.

  • vitezlejszlo

    őstag

    válasz vargalex #24725 üzenetére

    Nekem egy Atheros AR9285 van a laptopomban es emellett egy Samsung Galaxy S-sel wifizek, nem tudom melyik idezi elo a hibat (elozo Vargalexel ugyanez a hiba volt, ott a laptopozas kozben jott ki). Most az 1.1 -es verzioval annyi valtozott, hogy nem lassul le a wifim, vagy csak nem vettem eszre, csak idonkent betol ilyeneket a logba:

    [165671.330000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    [165671.570000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020

    Es ez ismetlodik...

    Laca

  • Bekzol

    csendes tag

    Sziasztok! Sajnos a routerem elég gyakran (naponta 3-4-szer) eldobja a wifi kapcsolatot, miközben telehányja a log-ot a következő hibaüzenettel:

    [123149.780000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    [123149.790000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Tudom, hogy ez a hiba már többször felmerült ezen a fórumon is, és külföldi fórumokon is körülnéztem de használható megoldást sajnos eddig nem találtam. Általában az a válasz rá, hogy az atheros driver hibája okozza, és várni kell, hátha egyszer összereszelnek egy használható verziót. Csak azért bosszantó egy kicsit, mert így éppen azt az alapfunkciót nem tölti be, amire az eszközt kitalálták. Szerintem sokan vagyunk úgy vele, hogy pl. minidlna, torrentkliens, vagy konfigurálható ledek nélkül még tudnánk létezni, de azt azért elvárnánk egy wifi routertől, hogy képes legyen folyamatos kapcsolat fenntartására az eszközeinkkel. Tudtok esetleg valamilyen megoldást, amivel legalább csökkenteni lehet a szakadások számát?

    A legújabb Vargalex fw van rajta.

    A válaszokat előre is köszönöm!

  • Bélaaaa

    őstag

    Ma reggel néztem a system.log-ot és látom, hogy tele van ilyen bejegyzésekkel. A WiFi szakadozik. Mi okozza ezt? (Nem másolom be az egészet, csak egy részét)
    vargalex v1.02.1

    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.200000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.210000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.450000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.460000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.700000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:33 OpenWrt kern.err kernel: [ 486.710000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 486.950000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 486.960000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.200000] ath: Failed to stop TX DMA, queues=0x100!
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.210000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.220000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.460000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.470000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.710000] ath: Failed to stop TX DMA, queues=0x100!
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.720000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jan 15 10:02:34 OpenWrt kern.err kernel: [ 487.730000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 487.980000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 487.990000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 488.220000] ath: Failed to stop TX DMA, queues=0x100!
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 488.240000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 488.250000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 488.490000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
    Jan 15 10:02:35 OpenWrt kern.err kernel: [ 488.500000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jan 15 10:02:36 OpenWrt kern.err kernel: [ 488.740000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
    Jan 15 10:02:36 OpenWrt kern.err kernel: [ 488.750000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

  • vitezlejszlo

    őstag

    Sziasztok

    Egész éjjel ment a 1.01-es Vargalex-es openwrt, a kernellog-ba viszont valamikor betolt egy ilyet:

    kworker/u:1: page allocation failure. order:0, mode:0x4020
    Call Trace:[<80256014>] 0x80256014
    [<80256014>] 0x80256014
    [<800ade54>] 0x800ade54
    [<802c0000>] 0x802c0000
    [<800cfec8>] 0x800cfec8
    [<800d0a14>] 0x800d0a14
    [<802c0000>] 0x802c0000
    [<800d17f4>] 0x800d17f4
    [<802c0000>] 0x802c0000
    [<801cb714>] 0x801cb714
    [<801cb068>] 0x801cb068
    [<801cb714>] 0x801cb714
    [<801ba1fc>] 0x801ba1fc
    [<801d5110>] 0x801d5110
    [<802c0000>] 0x802c0000
    [<801d54e8>] 0x801d54e8
    [<8007a624>] 0x8007a624
    [<801991b8>] 0x801991b8
    [<801991b8>] 0x801991b8
    [<8007a82c>] 0x8007a82c
    [<8006258c>] 0x8006258c
    [<800610e0>] 0x800610e0
    [<8006258c>] 0x8006258c
    [<801991b8>] 0x801991b8
    [<80199580>] 0x80199580
    [<801995ec>] 0x801995ec
    [<801995f4>] 0x801995f4
    [<80199948>] 0x80199948
    [<8006fb68>] 0x8006fb68
    [<80199800>] 0x80199800
    [<80086918>] 0x80086918
    [<80199580>] 0x80199580
    [<80088c04>] 0x80088c04
    [<802568d8>] 0x802568d8
    [<800889c8>] 0x800889c8
    [<800889c8>] 0x800889c8
    [<8008c52c>] 0x8008c52c
    [<80063fa0>] 0x80063fa0
    [<8008c4ac>] 0x8008c4ac
    [<80063f90>] 0x80063f90

    Mem-Info:
    Normal per-cpu:
    CPU 0: hi: 0, btch: 1 usd: 0
    active_anon:1160 inactive_anon:1446 isolated_anon:0
    active_file:592 inactive_file:1029 isolated_file:0
    unevictable:0 dirty:437 writeback:0 unstable:0
    free:70 slab_reclaimable:267 slab_unreclaimable:1730
    mapped:313 shmem:39 pagetables:85 bounce:0
    Normal free:280kB min:720kB low:900kB high:1080kB active_anon:4640kB inactive_anon:5784kB active_file:2368kB inactive_file:4116kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:32512kB mlocked:0kB dirty:1748kB writeback:0kB mapped:1252kB shmem:156kB slab_reclaimable:1068kB slab_unreclaimable:6920kB kernel_stack:416kB pagetables:340kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
    lowmem_reserve[]: 0 0
    Normal: 10*4kB 8*8kB 1*16kB 1*32kB 2*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 280kB
    1863 total pagecache pages
    203 pages in swap cache
    Swap cache stats: add 32599, delete 32396, find 20434/24690
    Free swap = 253036kB
    Total swap = 257004kB
    8192 pages RAM
    806 pages reserved
    1391 pages shared
    6081 pages non-shared
    SLUB: Unable to allocate memory on node -1 (gfp=0x20)
    cache: kmalloc-2048, object size: 2048, buffer size: 2048, default order: 2, min order: 0
    node 0: slabs: 0, objs: 0, free: 0
    eth0: out of memory
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Igazából nem értem, swap 256M van beállítva, alig használt belőle, mégis panaszkodik, hogy elfogyott a memória? A sima ram az kevés az oké, de hát mire való a swap? :D

    Laca

  • Zolás

    addikt

    válasz vargalex #18740 üzenetére

    Nov 21 18:59:27 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
    Nov 21 18:59:27 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Más hibát nem találok. Ezt látom sacc per kábé abból az időpontból.

  • bpmcwap

    senior tag

    válasz vargalex #17853 üzenetére

    még ma fel fogom tenni, de ha nem megy akkor lehetne kérni egy olyat hogy az utolsó stabil változat is fennt legyen a blogon???? azt hiszem 0,92... összetöröm... totál meghüjült. net még megy, azonkívül már lassan semmi...
    Már reboot után sem biztos hogy elérhető...most 10percig agyhalott volt viszont talán elkaptam valamit, hátha ez neked jelent valamit....
    Oct 25 15:57:26 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
    Oct 25 15:57:26 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Oct 25 15:57:26 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
    Oct 25 15:57:26 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Oct 25 15:57:28 OpenWrt kern.err kernel: ath: Failed to stop TX DMA!

  • Begi

    senior tag

    válasz vargalex #16293 üzenetére

    Hétvégén megy is fel! :C :C :C :R :R

    Illetve lenne még egy kérdésem:
    Mem-Info:
    Normal per-cpu:
    CPU 0: hi: 0, btch: 1 usd: 0
    active_anon:1244 inactive_anon:1298 isolated_anon:0
    active_file:502 inactive_file:811 isolated_file:0
    unevictable:0 dirty:63 writeback:0 unstable:0
    free:70 slab_reclaimable:651 slab_unreclaimable:1663
    mapped:177 shmem:10 pagetables:94 bounce:0
    Normal free:280kB min:720kB low:900kB high:1080kB active_anon:4976kB inactive_anon:5192kB active_file:2008kB ina$
    lowmem_reserve[]: 0 0
    Normal: 0*4kB 1*8kB 1*16kB 0*32kB 2*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 280kB
    1860 total pagecache pages
    532 pages in swap cache
    Swap cache stats: add 1767927, delete 1767395, find 730587/1038170
    Free swap = 496232kB
    Total swap = 506040kB
    8192 pages RAM
    806 pages reserved
    1709 pages shared
    5741 pages non-shared
    SLUB: Unable to allocate memory on node -1 (gfp=0x20)
    cache: kmalloc-2048, object size: 2048, buffer size: 2048, default order: 2, min order: 0
    node 0: slabs: 0, objs: 0, free: 0
    eth0: out of memory
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040unevictable:0 dirty:63 writeback:0 unstable:0
    free:70 slab_reclaimable:651 slab_unreclaimable:1663
    mapped:177 shmem:10 pagetables:94 bounce:0
    Normal free:280kB min:720kB low:900kB high:1080kB active_anon:4976kB inactive_anon:5192kB active_file:2008kB ina$
    lowmem_reserve[]: 0 0
    Normal: 0*4kB 1*8kB 1*16kB 0*32kB 2*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 280kB
    1860 total pagecache pages
    532 pages in swap cache
    Swap cache stats: add 1767927, delete 1767395, find 730587/1038170
    Free swap = 496232kB
    Total swap = 506040kB
    8192 pages RAM
    806 pages reserved
    1709 pages shared
    5741 pages non-shared
    SLUB: Unable to allocate memory on node -1 (gfp=0x20)
    cache: kmalloc-2048, object size: 2048, buffer size: 2048, default order: 2, min order: 0
    node 0: slabs: 0, objs: 0, free: 0
    eth0: out of memory
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    Tele van ilyennel a dmesg. Vajon mitől lehet?

    Egy kicsit zavar ez az eth0: out of memory:)

  • Bubukain

    senior tag

    sziasztok

    idönként elmegy a wifi-m, és ilyen üzenetek jelennek meg a kernel logban:

    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00028020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00028020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00028020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

    firmware:
    OpenWrt Firmware Attitude Adjustment (r26878) / LuCI Trunk 0.10+svn7047

    hardver hiba vagy szoftverhiba lehet?
    esetleg frissítéssel gyógyítható?

  • Begi

    senior tag

    Sziasztok!

    Ma nézegettem a dmesg-t és ilyeneket találtam benne (fw: vargalex 0.7):

    SLUB: Unable to allocate memory on node -1 (gfp=0x20)
    cache: files_cache, object size: 192, buffer size: 192, default order: 0, min order: 0
    node 0: slabs: 0, objs: 0, free: 0
    swapper: page allocation failure. order:0, mode:0x20
    Call Trace:[<80068fd4>] 0x80068fd4

    Illetve:
    SLUB: Unable to allocate memory on node -1 (gfp=0x20)
    cache: files_cache, object size: 192, buffer size: 192, default order: 0, min order: 0
    node 0: slabs: 0, objs: 0, free: 0
    eth0: out of memory
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020

    Mitől lehet?

  • bba

    tag

    Sziasztok!

    Openwrt Alex v0.7-es változat van fenn, de az istennek sem tudom működésre bírni a wifi antennát, pedig gyárival, és korábbna egy ideig ment. Átállítom az országot csatornát, SSID, biztonságot stb, de utána nem akar működni és az alábbi kernel hibát olvasom:

    "device wlan0 left promiscuous mode
    br-lan: port 2(wlan0) entering forwarding state
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    "

    mi a teendő ilyenkor? mit és hogyna kell beállítani, hogy működjön?

    már próbáltam defaultra resetelni a routert, de akkor sem megy :(

  • BStorm

    csendes tag

    "daemon.warn dnsmasq[310]: failed to access /tmp/resolv.conf.auto: No such file or directory"
    "kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020"
    Erre a 2 hibara van valakinek valami otlete?

  • BStorm

    csendes tag

    Joreggelt!

    Reggel beleneztem a router system log-jaba, es talaltam par failed dolgot, ez utan erdeklodnek hogy mik ezek, es miben befolyasoljak a mukodest?:

    "daemon.warn dnsmasq[310]: failed to access /tmp/resolv.conf.auto: No such file or directory"

    "kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020"

    Valaszokat elore is koszi!

  • wwenigma

    Jómunkásember

    Néhány napja meghalt a wifim a routeren. Neha megy de 99%-ban ezeket dobalja, barmelyik firmware-rel.

    Mar 27 03:58:54 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:55 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:55 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Mar 27 03:58:55 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:56 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:56 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Mar 27 03:58:56 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:57 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    Mar 27 03:58:57 OpenWrt kern.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Mar 27 03:58:57 OpenWrt kern.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020

    Lehetne valahogy resetelni az egeszet? Vagy gyarit rakjam vissza, hatha megjavul es utana megint OpenWRT?

    mod: most neztem, vadiuj friss firmware a TP-Linktől: [link]

    Published Date 5/6/2011
    File Size 5.147 MB
    Operating System Windows 2000/XP/2003/7/Vista/Linux/MAC
    Modifications and
    Bug Fixes

    Support FTP Server function on USB port;
    Support Media Server function;
    Optimize network USB storage function;
    Virtual server support different internal/external port;
    Optimize the access control feature;
    Router can be accessed by "tplinklogin.net";
    Router can detect the IP conflict between WAN and LAN port;
    Add step MAC Clone in Quick setup;
    Support daylight saving time.

    Notes For TL-WR1043ND

  • wwenigma

    Jómunkásember

    válasz mobal #10733 üzenetére

    HT20-ba hasznald csak akkor gyk. nem hibazik.... sajnos ez van, folyamatosan reszelik az Atheros drivert. Nekem 9nap uptime utan mindössze ennyi hiba van a kernel logban:

    ar71xx-wdt: enabling watchdog timer
    ath: Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x40d22
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ------------[ cut here ]------------
    WARNING: at /opt/projekty/openwrt/ar71xx-backfire/build_dir/linux-ar71xx/compat-wireless-2011-02-07/drivers/net/wireless/ath/ath9k/recv.c:509 0x817a795c()
    Modules linked in: fuse ledtrig_usbdev xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_LED xt_HL xt_MARK ipt_ECN xt_CLASSIFY xt_hl xt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn xt_DSCP xt_dscp xt_string xt_layer7 ipt_MASQUERADE iptable_nat nf_nat xt_CONNMARK xt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async vfat fat ath9k ath9k_common ath9k_hw ath nls_utf8 nls_iso8859_1 nls_cp437 mac80211 pppoe ts_fsm pppox ts_bm ts_kmp ppp_generic slhc crc_ccitt cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc usb_storage ehci_hcd sd_mod ext2 ext3 jbd ext4 jbd2 usbcore scsi_mod nls_base mbcache crc16 leds_gpio button_hotplug gpio_buttons input_polldev input_core
    Call Trace:[<800877fc>] 0x800877fc
    [<800686c4>] 0x800686c4
    [<800686c4>] 0x800686c4
    [<80086708>] 0x80086708
    [<817a795c>] 0x817a795c
    [<817b0000>] 0x817b0000
    [<817a795c>] 0x817a795c
    [<817a4538>] 0x817a4538
    [<800809e8>] 0x800809e8
    [<817a0210>] 0x817a0210
    [<814c468c>] 0x814c468c
    [<814c468c>] 0x814c468c
    [<817a32f0>] 0x817a32f0
    [<80097b88>] 0x80097b88
    [<80420c88>] 0x80420c88
    [<817a5a70>] 0x817a5a70
    [<817a4c20>] 0x817a4c20
    [<8008b95c>] 0x8008b95c
    [<800b18a8>] 0x800b18a8
    [<8008c150>] 0x8008c150
    [<8008c230>] 0x8008c230
    [<8006082c>] 0x8006082c
    [<80060a00>] 0x80060a00
    [<8006b60c>] 0x8006b60c
    [<8006caac>] 0x8006caac
    [<80060a20>] 0x80060a20
    [<802e8a54>] 0x802e8a54
    [<802e83a8>] 0x802e83a8

    ---[ end trace 212ecc4a162ad929 ]---
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    UDP: short packet: From 123.180.99.49:7069 13905/109 to 94.21.101.106:51234
    ath: Failed to stop TX DMA in 100 msec after killing last frame
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x40d22
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020

    Telóm van folyamatosan wifi-n ha otthon vagyok. Ez sem a legutolsó firm ami fentvan a routeren, EKO-tol 19.-én jött ki a legfrissebb, azt valoszinuleg reggel miutan melobol hazamentem akkor rakom fel. Folyamatosan szunnek meg a hibak, 2 hetente frissitem a routert es egyre jobban megy minden téren.

  • mobal

    nagyúr

    Sziasztok!

    Trunkos fw ilyen hibákat dob:

    ath: EEPROM regdomain: 0x0
    ath: EEPROM indicates default country code should be used
    ath: doing EEPROM country->regdmn map search
    ath: country maps to regdmn code: 0x3a
    ath: Country alpha2 being used: US
    ath: Regpair used: 0x3a
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Failed to stop TX DMA in 100 msec after killing last frame
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Failed to stop TX DMA in 100 msec after killing last frame

  • wwenigma

    Jómunkásember

    Tegnap próbáltam frissiteni a sok WIFI hiba miatt, legujabb EKO firm. tmp-be masoltam a cuccot, de megint elakadt frissites soran, es soroskabellel kellett mentenem.... mar ossze se raktam, ugyis nemsokara vinnem kell memógyarapítani.

    Viszont uj backfire mar jobb wifi szempontból legalább. :DDD

    cfg80211: Calling CRDA for country: HU
    cfg80211: Regulatory domain changed to country: HU
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
    ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
    ------------[ cut here ]------------
    WARNING: at /opt/projekty/openwrt/ar71xx-backfire/build_dir/linux-ar71xx/compat-wireless-2011-01-05/drivers/net/wireless/ath/ath9k/recv.c:536 0x80c879c4()
    Modules linked in: fuse ledtrig_usbdev nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async vfat fat ath9k ath9k_common ath9k_hw ath nls_utf8 nls_iso8859_1 nls_cp437 mac80211 crc_ccitt pppoe pppox ppp_generic cfg80211 slhc compat_firmware_class compat arc4 aes_generic deflate ecb cbc usb_storage ehci_hcd sd_mod ext2 ext3 jbd ext4 jbd2 usbcore scsi_mod nls_base mbcache crc16 leds_gpio button_hotplug gpio_buttons input_polldev input_core
    Call Trace:[<800877cc>] 0x800877cc
    [<80068694>] 0x80068694
    [<80068694>] 0x80068694
    [<800866d8>] 0x800866d8

    Bár ilyen hibak még előjönnek bizonyos beallitasnal, de nem ölik meg a routert meg a kapcsolatot.

Új hozzászólás Aktív témák

Hirdetés